원자로에서 나와서 증기발생기의 열원
펌) 원자로에서 나와서 증기발생기의 열원으로 사용되는 고온관과 저온관 열출력의 측정에 사용되는 저항온도센서인 백금저항성온도센서(RTD)에 대한 나의 질문에 대한 chatGPT의 답변입니다.
기대했던 만큼의 답변으로 백과사전과 같은 역할을 잘 하는군요. 구굴에서 검색하는것도 이에 못지 않지만
구굴에서는 검색자가 직접 타자 치고 내놓는 많은 답변들중에서 찾고자하는 정보에 가장 근접한것을 추려서 읽어야 하는 노고를 줄여주는 장점이 있지만
디테일 한 그림과 절차등은 역시 구굴을 찾게 됩니다. 밑에 붙이는 측온저항온도센서 그림들은 구굴선생의 그림들중 몇개를 빌려와서 붙입니다.
앞으로 그림도 함께 나오는 인공지능이 출현할 것이 기대합니다.
인공지능 chatGPT 답변을 끌어 붙이고 그림은 구굴에서 빌려왔읍니다.
Byunggon Kim : Please describe the manufacturing methods used for resistance temperature detectors (RTDs) such as PT100, which are used for high-temperature pipe temperature sensors in commercial nuclear power plant reactors for indirect measurement, as well as low-temperature pipe sensors. Additionally, please explain the testing methods for precision, sensitivity, reproducibility, and especially time response of these sensors, to the best of your knowledge.
Resistance temperature detectors (RTDs) are commonly used for temperature measurement in commercial nuclear power plant reactors, particularly for high-temperature and low-temperature pipe temperature sensors.
Manufacturing methods for RTDs such as PT100 involve the use of high-purity platinum wire or film. The wire or film is wound or deposited onto a ceramic substrate, and then sealed in a protective sheath or enclosure. The PT100 RTD is characterized by a resistance of 100 ohms at 0°C and a positive temperature coefficient of resistance. The manufacturing process must be carefully controlled to ensure consistency and accuracy of the sensor.
To test the precision, sensitivity, reproducibility, and time response of RTDs, various methods can be employed. One common method is to immerse the RTD in a stable temperature bath and measure its output voltage over time as the temperature changes. This can be used to determine the sensor's accuracy, repeatability, and response time. Additionally, RTDs can be tested for linearity and hysteresis by subjecting them to a series of temperature cycles.
The sensors' precision and reproducibility can be improved by ensuring consistent manufacturing practices, such as maintaining uniformity in the wire or film deposition and the protective sheath. Additionally, using higher-purity platinum wire and substrates can improve the sensitivity and linearity of the sensor.
Overall, the manufacturing and testing of RTDs for temperature measurement in commercial nuclear power plant reactors requires strict quality control measures to ensure accuracy, reliability, and safety.
Byunggon Kim
how about translate your response about above RTD to Korean
저항 온도계(RTD)는 상용 원자력 발전소 반응기의 고온 및 저온 파이프 온도 센서에서 온도 측정에 널리 사용됩니다.
PT100과 같은 RTD의 제조 방법은 고순도의 백금 선 또는 백금 필름을 사용합니다. 선 또는 필름은 세라믹 기판에 감겨 또는 층이 형성된 후 보호용 외피나 케이스에 밀봉됩니다. PT100 RTD는 0℃에서 100옴의 저항과 양의 온도계수를 특징으로 합니다. 제조 과정은 센서의 일관성과 정확성을 보장하기 위해 엄격하게 관리되어야 합니다.
RTD의 정밀도, 감도, 재현성, 시간응답을 테스트하기 위해서는 다양한 방법을 사용할 수 있습니다. 일반적으로 안정적인 온도 욕조에 RTD를 잠수시켜 온도가 변화함에 따라 출력 전압을 측정합니다. 이를 통해 센서의 정확성, 반복성 및 응답 시간을 결정할 수 있습니다. 또한 일련의 온도 주기에 RTD를 노출시켜 선형성 및 히스테리시스를 테스트할 수 있습니다.
제조 및 테스트 방법의 일관성을 유지하여 RTD의 정밀도 및 재현성을 개선할 수 있습니다. 이를 위해 필름 또는 외피의 감칠맛과 보호층의 일관성을 유지하는 것이 중요합니다. 또한 고순도 백금 선과 기판을 사용하면 센서의 감도 및 선형성을 개선할 수 있습니다.
총적으로, 상용 원자력 발전소 반응기에서 온도 측정을 위한 RTD의 제조 및 테스트에는 정확성, 신뢰성 및 안전성을 보장하기 위해 엄격한 품질 관리 조치가 필요합니다.